Wi-Fi dropouts are one of the most common problems we are called about, and one of the most misunderstood. "The internet keeps dropping out" describes a symptom, not a cause. Here are the usual culprits, roughly in the order we find them.
1. One router trying to cover too much
The router from your internet provider is designed to cover a home unit, not a shop, an office and a warehouse floor. When there is one access point and twenty devices, the ones furthest away drop off and rejoin constantly — which feels exactly like "the internet is dropping out".
The fix: business-grade access points placed where the work happens, connected by cable rather than repeating each other through walls.
2. Placement decided by where the socket was
Access points get installed wherever a cable point already existed, which is often a cupboard, a ceiling void behind air conditioning, or a corner of the office.
The fix: plan coverage from the floor plan, then get the cabling to the right places. Access point placement does more for reliability than buying more expensive hardware.
3. Everything on one flat network
Cameras, guest phones, tills, laptops and the office printer all sharing one network means every device competes with every other, and one misbehaving device can slow everyone down.
The fix: separate the business, guest and device networks, and give the systems that carry money and stock priority.
4. Old firmware and forgotten hardware
That access point in the store room may be running software from six years ago, with known faults that were fixed long ago.
The fix: manage the network centrally so everything is visible, on supported firmware, and documented.
5. The problem is not the Wi-Fi at all
This is why diagnosis matters. A fault on the phone line, congestion at peak times and an in-building coverage problem look identical to staff, and need completely different fixes. Changing access points will not fix a faulty service, and upgrading the plan will not fix a dead spot.
How to narrow it down in ten minutes
- Does it fail on one device, or on every device at once?
- Does it fail in one part of the building, or everywhere?
- Does it happen at the same time each day?
- Does a wired connection fail at the same moment?
Those four answers usually point straight at the cause: a device, a coverage gap, a capacity problem, or the connection itself.
We design, install and fix business networks across South-West Sydney using Ubiquiti UniFi equipment, and we will tell you whether you need new hardware or just a properly configured version of what you already own.
